Interactive Take-off Sheet: Ceilings

Back to: From Blueprints to Residential Energy Code Compliance > Completing Take-Off Sheets
Blueprint Controls Ruler Controls
Show Zoom Rotate Rotate
Take-Off Sheet: Ceilings
Ceiling
#		 Zone /
Room (P)		 Type (P) R-
Value
(B)		 Ins. Grade Ceiling Area (or Ceiling Length and Width) Framing
Net Area (ft2) - P Length (P) Width (P) Framing
Fraction
(B)		 Trusses
(Wood or
Metal) - (B)
1
 1st Floor Under Attic 38 Not Inspected 223.5 0.11 Wood
2 2nd Floor Under Attic 30 Not Inspected 0.11 Wood
3 2nd Floor Knee Wall 30 Not Inspected 0.11 Wood
4 2nd Floor Knee Wall 30 Not Inspected 44.4 0.11 Wood
5 2nd Floor Knee Wall 30 Not Inspected 53.4 0.11 Wood
6 2nd Floor Knee Wall 30 Not Inspected 0.11 Wood

Some of your calculations are incorrect.

The incorrect take-off sheet values have been indicated by red highlighting. To ensure your understanding of this section, we strongly recommend you re-measure the highlighted components and insert the updated values into the take-off sheet. Proceed to the next frame once you have successfully completed collecting data for this take-off sheet.

Congratulations!

You have correctly extracted the required data.

Click the "Complete Lesson" button below to record your progress and continue this course.

Lesson tags: Interactive
Back to: From Blueprints to Residential Energy Code Compliance > Completing Take-Off Sheets